high performance in build & quality
Free Shipping for Orders IN aUSTRALIA OVER $199
- TECH SPECS
- IN THE BOX
- MODEL FITMENT
- RELATED PRODUCTS
E30 24V 10 DEGREE TWIST DSSR SELECTOR ROD
1984 - 1988 models must change to later BMW selector joint part# 25117503525.
Because when you swap a DOHC motor into an E30, the position of the motor is tilted which tilts the transmission 10 degrees. This is why our transmission brace is used to tilt the transmission to account for this lean. So now that the transmission is tilted in the correct position you need to then center the shifter into the E30 hole again. This is where the 10-degree twist DSSR comes in. Not only does it center the shifter in the interior console, but it also gives you all the benefits of a DSSR.
WHAT'S IN THE BOX
- 1x 10 Degree Twist DSSR Selector Rod
- Hardware to suit.
- Designed for 24v Swap E30s (ie. M50, M52, S50, S52 etc)
- Must retain Getrag 260 Gearbox
YOU MIGHT BE INTERESTED IN....
Step 3: Grab your Garagistic DSSR and starting with the selector joint side first line up the holes on the DSSR with the selector joint. It should be a tight fit but if it's too tight open the tabs a bit till you achieve proper fitment. Once aligned slide the provided pins in with a washer on each side followed by the c-clip to lock it in. Repeat on the shifter side.
Notice: If you upgraded to a Z3 shifter you will have to shave down the sides of the shifter for the DSSR to fit
*Instructions are intended to provide general information only. We recommend a professional automotive technician install any of our products.
WHY BUY FROM BSS.
We are here to help
Call, Email or SMS us anytime. We are here to help you find the right part.
What's that? more parts!?
We are constantly looking to expand our product range. Support BSS and we will support you with a wider range of quality parts!