Introducing our large diameter (44mm) Garagistic trailing arm bushings for E28, E24, and E34 chassis is polyurethane and delrin. The factory rubber bushings are made with rubber and designed to provide comfort. This means that they deflect in multiple directions under use making the rear end feel unpredictable or numb to the driver. This is not good if you want to feel tuned in to your car and the road! We now offer these upgraded bushings in 80A, 95A, and solid delrin to help tighten up your rear end for the ultimate in driver feel. These bushings are recommended for the performance BMW enthusiast with increasing levels of stiffness depending on the desired use. Eliminate the slop in your rear end with a set of Garagistic trailing arm bushings!

THESE BUSHINGS REQUIRE THE REMOVAL OF THE PITMAN ARM (ONLY SOME MODELS CAME EQUIPPED WITH THIS) FOR PROPER USE.

Which model BMW will these rear trailing arm bushings fit?

E28

• M5
• M535i
• 535/i (09/82+)
• 528i
• 528e (09/82+)
• 525i (04/86+)
• 525e (04/86+)
• 520i (04/86+)
• 524td (04/86+)

E24

• 628csi (05/82+)
• 633csi (09/82+)
• 635csi (09/82+)
• M6 (09/82+)
• M635csi (05/82+)

E34

• ALL MODELS

QUICK NOTE ABOUT USING OLD TRAILING ARM BOLTS OR ALUMINUM RACES

Please keep in mind when shopping around for trailing arm bushings that a lot of competitors use aluminum for the race instead of steel. This is not a good idea. It's not a good idea because nothing that rotates should be aluminum as it will wear due to the soft and malleable nature of aluminum compared to steel. Your BMW OEM race was steel and so is ours.

Another note-worthy concern when purchasing bushings is in regards to hardware and tolerances; we make our products compatible with our parts as well as our competitors. We designed our parts for cross-compatibility to make things a bit easier for you when shopping for you E30. Our BMW poly trailing arm bushings are a prime example of this, they are not only be compatible with our camber and toe kit but others as well. The bolt diameter on the eccentric hardware (OEM BMW) for those who make their rear subframe adjustable using our camber and toe kit (while they have the subframe out) is bigger then the old OEM E30 hardware (which could possibly be worn as well). So for this reason, we recommend that you replace your old, worn, tired and small stock hardware for bigger (and tighter fitting) hardware which you can find in the options list above. This is optional. However it's a great way to get an even more precise feel in the trailing arms you cant get from other kits out there. Do it once, do it right. Kit includes 10.9 grade bolts, washers and even nylon locking nuts. Everything for the install.