high performance in build & quality
- TECH SPECS
- IN THE BOX
- MODEL FITMENT
- RELATED PRODUCTS
DELRIN BRAKE PEDAL BUSHINGS - E30, E36, E46, Z3, Z4
No one wants to crawl under a dash more than they have to! Using our Delrin clutch pedal bushings as a replacement to the stock bushings means you will never need to replace them again, this is a permanent fix! This Brass clutch pedal bushings unit is ideal for the clutch pedal, save the Delrin for the brakes. The reason for this is because the clutch pedal usually sees more use (rotational wise) making the brass a more appropriate material. However, for those wanting to go truly hardcore, these pedal bushings can be used for both the brake and clutch.
WHAT'S IN THE BOX
- 2x Delrin Bushings
- Fits all 1989-2005 3-series (E30, E36, E46), all 1989-2006 5-series (E34, E39, E60), all Z3, Z4, ( as well as all other manual-transmission BMW models built since 1989)
- E30: Late models ONLY (89+)
- E34: ALL
- E36: ALL
- E46: ALL
YOU MIGHT BE INTERESTED IN....
INSTALLATION NOTES FOR E30
Step 3: Prior to the next step, keep in mind. before removing the clips from the pin ends, pay attention (if you are replacing the clutch pedal bushing) to the clutch over center helper spring and how it is attached, most likely they will come apart when the pedal is removed. Now remove the three locking clips on the left side pedal using a flat head screw driver and slide the pins to the right and they will come out. The pin at the top is the fixed clutch pivot pin, slide the pedal off this pin to remove the pedal. Make sure to really pay attention to how all your pins and how the pedal is mounted for proper re-installation.
Step 4: Once you have removed the pedal, you can now get to the issue and replace the original worn bushing. Then install your new Garagistic bushing and it is highly recommended you lube the bushing prior to installation using white lithium grease.
Step 5: Once your bushing is installed, re-assemble your pedal assembly the same exact way it was all removed. Once it is all re-assembled, you can spray white lithium grease at all the pivot points and moving components. Then re-install your pedal's master cylinder (if doing the clutch pedal, make sure the clutch over-center helper spring is attached properly) and verify all components are installed correctly and are properly lubed.
Step 6: Once you have verified all components are properly working, do not forget to re-install your electric switch sensors whether it is for the clutch or brake pedal as it may need re-adjustment. Once you have confirmed they are all adjusted accordingly you can now re-install your panels and you are all finished!
WHY BUY FROM BSS.
We are here to help
Call, Email or SMS us anytime. We are here to help you find the right part.
What's that? more parts!?
We are constantly looking to expand our product range. Support BSS and we will support you with a wider range of quality parts!